|
Home
Up
Specials
New Products
Glass Machines
Lapidary Supplies
Information
Catalog Request
Intro to Lapidary
Intro to glass beveling
About us
| |
Horizontal Lapidary Units
16" Horizontal Two-Speed Lapidary Unit
With Proper Accessories, Laps, Grinds, Sands &
Polishes Large or Flat Surfaces, Ideal for Working Stone Book Ends or Clock
Faces.
350TSL Model Shown
Horizontal Lap Features:
- Heavy welded steel chassis with green finish
- Removable grit catch pan
- Removable splash guard
- 16" Tapered steel plate (wheel)
- 1" Steel shaft with welded flange
- Heavy duty ball bearings, neoprene sealed, greased for life
- Water can, valve and holder
- 9" Silicon carbide grinding wheel with adapter & wrench
- 10" Sanding and polishing heads
- 1/3 HP, 110V, 60 HZ heavy duty motor
Tapered steel plate turns at 220 RPM and is
reversible with a blanched ground flat side. The tapered side permits
large pieces to be abraded with easier control. Pieces larger than 8"
can be abraded by turning the work piece. The flat side of the wheel is
suitable for abrading small work pieces.
 To Change Speed: Remove 16" plate and splash pan.
The two-step pulleys mounted on the motor and drive shaft are now in view.
Move the belt from the matched slow speed pulleys to the matched fast
speed pulleys.
CAUTION: Do not run the
steel lap plate at high
speed. Grinding wheels throw water under splash guard
- perfectly clean to use. See what you are grinding, no guessing or
splash.
Sanding & polishing buffs may be used with or without shield.
Specimens rest on the buff, so you relax with your arms resting on the
unit.
 This multi-featured unit includes 282 motor,
SGW931 9" diameter grinding wheel, LAW930 adapter and wrench, WSG332 splash
guard, ASD334 aluminum sanding disc, APD336 aluminum polish disc, WC5045 water
feed, & LFP316 mild steel face plate. Horizontal unit comes fully
assembled with instructions and guarantee. Size 22"L x 23"W x
35"H. Shipping weight 150 lbs. SHIPS
FREIGHT COLLECT Call or e-mail for freight quote.
| Model No. 350TSL -- Deluxe Two-Speed (220/1900
RPM) Horizontal Lapidary Unit |
$ 1,750.00 |
 |
| Model No. 3502TL -- Deluxe Two-Speed (220/1900
RPM) Horizontal Lapidary Unit 220V, 50Hz |
$ 1,792.00 |
|
Accessories for Horizontal Lap Units
| MTR282 -- 1/3 HP, 110V, Heavy Duty Motor
with switch. Shipping weight 15 lbs. |
$ 154.50 |
|
| SGW931 -- 9" x 1" Silicon Carbide
Grinding Wheel, 100 or 220 grit (specify). Shipping weight 5 lbs. |
$ 131.25 |
|
| LAW930 -- Adapter and Wrench for above
wheel 3 lb. |
$ 42.00 |
|
| WSG332 -- Splash Guard for use with
grinding wheel 10 lb. |
$ 47.25 |
|
| ASD334 -- Sanding Disc, 10" x
1" - 8 cast aluminum. Specify grit. Shipping weight 7 lbs. |
$ 68.75 |
|
| APD336 -- Polishing Disc, 10" x
1" - 8 cast aluminum. Leather face. Shipping weight 7 lbs. |
$ 72.00 |
|
| APB338 -- Polish Buff, 10" x
1" - 8 cast aluminum. Hard felt face. Shipping weight 7 lbs. |
$ 85.00 |
|
| WC5045 -- Water Feed, 1/2 gallon
polyvinyl water can with valve and stand (pictured on model 350 unit) |
$ 75.00 |
|
| LFP316 -- Face Plate, 16" x
1/2" x 1" - 8. Tapered face reversible with a Blanched flat side.
Shipping weight 50 lbs. |
$ 225.75 |
|
| SFP315 -- Face Plate, 12" x
1/2" x 1" - 8. Tapered face reversible with a flat side.
Shipping weight 50 lbs. |
$ 157.50 |
|
| BGP316 -- Face Plate, 16" x
1/2" x 1" - 8. Two blanched & ground sides. No taper.
Shipping weight 50 lbs. |
$ 195.00 |
|
Automatic Lapper Kit
Allows rock to turn and lap automatically
without being hand held. Kit includes swivel, 1/2" diameter x
16" length extension arm, adjustable iron weight, dop wax and
instructions. Shipping weight 10 lbs.
| ALK330 -- Automatic Lapper Kit |
$ 39.00 |
|
16" Horizontal
Single-Speed Lapidary Unit
Single-Speed, Grit-Fed Rougher is Ideal for Producing Glass Bevels or
Working Stone Book Ends and Clock Faces
5030HL Shown
Horizontal Lap Features:
- Heavy welded steel chassis with green finish
- Removable grit catch pan
- Removable splash guard
- 16" Tapered Steel Plate (wheel)
- 1" Steel shaft with welded flange
- Heavy duty ball bearings, neoprene sealed, greased for life
- 1/3 HP, 110V, 60 HZ heavy duty motor
- Water can, valve, holder and grit chute
Water through the drip valve slowly feeds abrasive grit to the wheel
surface. Tapered iron plate turns at 220 RPM and is reversible with a flat
side. The tapered side permit large pieces of large pieces of glass to be
abraded with easier control. Pieces larger than 8 inches can be abraded by
turning the work piece. The flat side of the wheel is suitable for
abrading small work pieces.
Unit comes fully assembled with 1/3 HP motor, instructions and
guarantee. Size 22"L x 21"W x 30"H. Shipping weight 125 lbs. SHIPS
FREIGHT COLLECT Call or e-mail for freight quote.
| Model No. 5030HL -- 16" Horizontal
Single-Speed Lap |
$ 1,325.00 |
|
| Model No. 50302L -- 16" Horizontal
Single-Speed Lap 220V, 50hz |
$ 1,367.00 |
|
16" Single-speed Lap Kit
| LK5033 -- 16"
Single-speed Lap Kit
as show above. Shipping weight 50 lbs. |
$ 595.00 |
|
| AS5034 -- Extra
Arbor Shaft with 2 - Bearing s with flange. Shipping weight 5 lbs. |
$ 156.00 |
|
| WC5035 -- Water
Can, Valve, Grit Chute & Rod. Shipping weight 3 lbs. |
$ 80.00 |
|
16" Two-speed Lap Kit
The 370TLK
single speed lap kit comes complete with:
-
1”
Steel shaft with welded flange and 1” - 8 right hand thread.
-
Galvanized
metal splash pan.
-
2
step motor drive V-pulley.
-
2
step machine drive V-pulley.
-
16”
Tapered Steel Plate (Wheel) with 1” - 8 right hand thread.
-
Two
Heavy Duty 1” Sealmaster Bearings, with flange.
-
40” x 1/2” V-Belt.
| TLK370 Two Speed lapping
Kit |
$ 675.00 |
|
|
